2K Acrylic Clearcoat

HGP Aerosol paints_2K Clearcoat is a 2 components Polyurethane based lacquer, suitable for spot repair, gives a long lasting high gloss finish. HGP Aerosol paints_2K Clearcoat stands out for its excellent gloss, levelling, resistance to UV and metallic effect reinforcing.
175,000 đ
Code: 3-BX-C2K



  • HGP Aerosol paints_2K Acrylic Clearcoat is a high performance 2K Acrylic Clearcoat which anti-Scratch HS acrylic clearcoat, designed for car repair application with mixing ratio 2:1.
  • High solids content .
  • Stands out for its excellent gloss, levelling, resistance to UV and metallic effect reinforcing.
  • Resistance to chemicals and weather.
  • Excellent abrasion and impact resistance, high gloss retention which had been tested to serve under sever conditions.


  • Main component is Acrylic modified Resin 2K Clearcoat.
  • 1K Clear Coat gives an excellent gloss finish and UV resistant.
  • Substrate:        Basecoat
  • Flash point:     Under 23°C
  • Color:              Transparent


Surface preparation

  • After 10 – 20 minutes, all of finish coating is dried completely, applicartion for HGP Aerosol paints_2K Clearcoat.

Spraying Technique

  • Shake the aerosol can for at least 2 minutes before use;
  • Press the button on the spray head. Try on a hard cover before painting;
  • Spray distance: 10 – 15cm;
  • Spray 1 single coat (not too wet), flash off 5 to 10 minutes (touching does not stick). Then spray 1 couple coats;
  • Drying times: 15 - 30 minutes.


  • Inhalation: Remove the victim to fresh air area. If rapid recovery does not  occur, perform artificial respiration and obtain medical attention.
  • Skin Contact: Remove contaminated clothing. Wash skin immediately with plenty of water and soap. If persistent irritation occurs, obtain medical attention.
  • Eye Contact: Immediately flush the eye with running water for at least 15 minutes. If persistent irritation occurs, obtain medical attention.
  • Ingestion: If the patient conscious, give plenty of water to drink. Do not  induce vomiting. If rapid recovery does not occur, obtain medical attention.


  • HGP Aerosol paints_2K Acrylic Clearcoat is only used whithin 24 hours since the product is compressed into the bottle.
  • Recommended Storage Temperature: not under -5°C and over 25°C.
  • Aerosol cans should be stored for two hours at room temperature before use. For long term storage, keep in a dry well ventilated area and away from direct sunlight and frost. To maximize the lifespan of your aerosol, always invert the can and spray upside down for a few seconds after each use to clear the nozzle. If the nozzle becomes blocked, remove it from the can and soak it in gentle thinners.

PACKING: 400ML Aerosol can

The above information is provied with high reliability without warranty. For more information, please contact Customer Service:


OfficeL4-27.OT06, Landmark 4 Tower, Vinhomes Central Park 

720A Đien Bien Phu St, 22 Ward, Binh Thanh Dist, HCMC, Vietnam.

Tel: 028 710 95 779

Email: info@nanoprotech.vn

Showroom: 779 Kha Van Can St, Linh Tay Ward, Thuduc Dist, HCMC, Vietnam.

Working time:  8h - 17h | Mon  - Sat


Send your comment


Relate Products