Car Colour

Scratches on the car due to the collision is annoying! Paint shop is far away, take time to bring the car out and wait! HGP_Aerosol paints_Car Colour meet this desire of the owner. A custom matched aerosol spray to your exact vehicle code.
175,000 đ
Code: 2-BX-CAR



  • This is a 2K paint Refinish (Solid, Metallic, Pearl, Crystal colors): fast drying, intense with excellent coverage.
  • The 2K color mixing system can accurately all of the vehicle’s colors from the original rich color ranges.
  • HGP Aerosol paints_Car Colour can be used for all types of car paints and there are enough color formulas from the world’s leading car manufacturers.
  • HGP Aerosol paints_Car Colour will achieve the coverage with less paints than other paints of the same level. So, saving time and material costs are considerable.
  • HGP Aerosol paints_Car Colour must be coated on the top with 1K or 2K Clear for protection.

Main component is Acrylic modified Resin and 2K computerized paint system for the leading car manufacturers in the world.


  • Surface with standard coatings in good condition. The primers are coated and flattened well. Should use HGP’s primer paints.


  • Shake the aerosol can for at least 2 minutes before use;
  • Press the button on the spray head. Try on a hard cover before painting;
  • Spray distance: 10 – 15cm;
  • Spray 1 single coat (not too wet). Then spray 1 couple coats; 
  • Drying times between coats: 3 to 5 minutes (touching does not stick);                                      
  • After 10 – 20 minutes, all of finish coating is dried completely, applicartion for 1K or 2K Clear.


Surface preparation 

  1. Clean surface with water and soap. Rinse and dry.
  2. For best results, ensure the surface is thoroughly cleaned, degreased, dried and dust free. Wipe dry with a clean cloth.
  3. Repair according to damage. Adding mattic on the scratched and roughed parts,..
  4. HGP Aerosol paints–1K or 2K primer paints.
  5. Sand primed surfaces wet or dry with P600-P800 sandpaper, degrease and dry before applying HGP Aerosol paints_Car Colour.


Common Repair

  • Pay attention to the method of application.The spray must be in according to the procedure and apply coating within 20 minutes. Avoid over spraying.

Between the old and new paint layers: Apply the method of 2K Fade out Thiner.

① Coating the first of HGP Clear on over surface, spray  more over on the areas of repainting spots;
② Coating the second of HGP Clear, spray  more over on the area of repainting spots;
NO RECOMMENDED: Applied HGP Aerosol-2K Fade out Thiner on the sanded areas by P100 to lower the lid between the old and new paint layers that will be not finded them in polishing. ONLY USE INCASE REPAINTING.


  • Inhalation: Remove the victim to fresh air area. If rapid recovery does not  occur, perform artificial respiration and obtain medical attention.
  • Skin Contact: Remove contaminated clothing. Wash skin immediately with plenty of water and soap. If persistent irritation occurs, obtain medical attention.
  • Eye Contact: Immediately flush the eye with running water for at least 15 minutes. If persistent irritation occurs, obtain medical attention.
  • Ingestion: If the patient conscious, give plenty of water to drink. Do not  induce vomiting. If rapid recovery does not occur, obtain medical attention.


  • 2 years subject to proper storage conditions.
  • Recommended Storage Temperature: not under -5°C and over 25°C.
  • Aerosol cans should be stored for two hours at room temperature before use. For long term storage, keep in a dry well ventilated area and away from direct sunlight and frost. To maximize the lifespan of your aerosol, always invert the can and spray upside down for a few seconds after each use to clear the nozzle. If the nozzle becomes blocked, remove it from the can and soak it in gentle thinners.

PACKING: 400ML Aerosol can

The above information is provied with high reliability without warranty. For more information, please contact Customer Service:


OfficeL4-27.OT06, Landmark 4 Tower, Vinhomes Central Park 

720A Đien Bien Phu St, 22 Ward, Binh Thanh Dist, HCMC, Vietnam.

Tel: 028 710 95 779


Showroom: 779 Kha Van Can St, Linh Tay Ward, Thuduc Dist, HCMC, Vietnam.

Working time:  8h - 17h | Mon  - Sat




  • HGP Aerosol paints_Car Colour is not a ready made paint that is produced in high volumes in the factory. That is checked for integrity with the original car color code, then packed in the aerosol can. This is a packed color in the customer’s order – NOT in warehouse for mixed colors. This color is mixed after provied the color code, car manufacturer, model car, manufactured year from customer. We are based on thousands of available colors in our library to formulate accurate color. Please note that for metallic colors for most cars you will need to apply a Clearcoat (see related products) over the vehicle color to achieve an original finish.
  • If you need to spray new metal parts then HGP Aerosol_Etch Primer 13483 will be required followed by a single of coats of HGPAerosol_ Primer Grey NC0025. All plastic parts will need 1 coat of HGP Aerosol_Primer Solution PPPS followed by the topcoat.
  • In order to match your colour requirements exactly, please provied more color code, car manufacturer, model car, manufactured year. Otherwise, you should give us gas cap or actual color of  your vehicle to get accurate color from our technician.
2K computerized paint system HGP can mix paint types:
  • Metallic and Pearl Basecoat;
  • Solid Basecoat;
  • Solid Topcoat.
For more information how to find a paint color code. Please call 028 71095779 or Email:
  • Avatar
    Bùi cong (03-01-2019)
    Mình muốn mua máy chai màu xám tư vấn mình nha 0937985632
  • Avatar
    Bùi cong (03-01-2019)
    Có màu xám ko shop

Send your comment


Relate Products