Glass Binder 800R

• HGP Aerosol paints_Glass Binder 800R blended with original paints, can be mixed with slow-drying or quick-drying paints. High color fastness with a thick coat (10-20 microns). Good adhesion on most glass, ceramic, porcelain or brick surfaces, and will penetrate to the glass surface when combined with Candy. It is most suitable for all types of paints.
195,000 đ
Code: 3-BX-800R
Quantity

HGP_AEROSOL PAINTS_GLASS BINDER 800R DIY-MALAYSIA

 

DESCRIPTION:

  • HGP Aerosol paints_Glass Binder 800R blended with original paints, can be mixed with slow-drying or quick-drying paints. High color fastness  with a thick coat (10-20 microns). 
  • Excellent adhesion onto surfaces: glass, ceramic, enamel or tile.
  • Smooth and transparent finish perfectly.
  • Penetrate to the glass surface when combined with Candy.
  • ATTENTION! When use HGP Aerosol paints_ Glass Binder 800R must be combined with Harderner 2K (4:1).

PROPERTIES:

  • Main component is Acrylic modified Resin.
  • Not fading, especially in white and silver.
  • Suitable for the surfaces: glass, ceramic, enamel or tile.
  • Substrate:        Gloss coating.
  • Flash point:     Under 23°C
  • Color:              Transparent

RECOMMENDED USE:

Surface preparation

  • Clean surface with water and soap. Rinse and dry.
  • For best results, ensure the surface is thoroughly cleaned, degreased, dried and dust free. Wipe dry with a clean cloth.
  • After 10 – 20 minutes, all of finish coating is dried completely, applicartion for HGP Aerosol paints_Glass Binder 800R.

Spraying Technique

  • Shake the aerosol can for at least 2 minutes before use;
  • Press the button on the spray head. Try on a hard cover before painting;
  • Spray distance: 10 – 15cm;
  • Spray 1 single coat (thinner), flash off 5 to 10 minutes (touching does not stick). Then spray 1 couple coats;
  • Drying times: 15 - 30 minutes.

FIRST AID MEASURES:

  • Inhalation: Remove the victim to fresh air area. If rapid recovery does not  occur, perform artificial respiration and obtain medical attention.
  • Skin Contact: Remove contaminated clothing. Wash skin immediately with plenty of water and soap. If persistent irritation occurs, obtain medical attention.
  • Eye Contact: Immediately flush the eye with running water for at least 15 minutes. If persistent irritation occurs, obtain medical attention.
  • Ingestion: If the patient conscious, give plenty of water to drink. Do not  induce vomiting. If rapid recovery does not occur, obtain medical attention.

SHELF LIFE:

  • 2 years subject to proper storage conditions.
  • Recommended Storage Temperature: not under -5°C and over 25°C.
  • Aerosol cans should be stored for two hours at room temperature before use. For long term storage, keep in a dry well ventilated area and away from direct sunlight and frost. To maximize the lifespan of your aerosol, always invert the can and spray upside down for a few seconds after each use to clear the nozzle. If the nozzle becomes blocked, remove it from the can and soak it in gentle thinners.

PACKING: 400ML Aerosol can

The above information is provied with high reliability without warranty. For more information, please contact Customer Service:

 

OfficeL4-27.OT06, Landmark 4 Tower, Vinhomes Central Park 

720A Đien Bien Phu St, 22 Ward, Binh Thanh Dist, HCMC, Vietnam.

Tel: 028 710 95 779

Email: info@nanoprotech.vn

Showroom: 779 Kha Van Can St, Linh Tay Ward, Thuduc Dist, HCMC, Vietnam.

Working time:  8h - 17h | Mon  - Sat

 

 

Send your comment

Captcha

Relate Products

Scroll