NC Matt Black

HGP Aerosol paints_NC Matt Black is a special matt black rubber coating. Suitable for handling rubber surfaces such as tires, tires, rubber bands, rubber Ron, black plastic, ... Creating a matte black surface like a new car, with good adhesion.
145,000 đ
Code: 3-BX-9999
Quantity

HGP AEROSOL PAINTS_NC MATT BLACK 

DESCRIPTION:

  • HGP Aerosol paints_NC Matt Black  is applied when the tire is yellowed and cannot be overcome by normal curing agents.
  • Good adhesion on many materials such as rubber, young plastic.
  • HGP Aerosol paints_NC Matt Black suits to paint indoor and outdoor objects.

PROPERTIES:

  • Basis of the binder: rubber-like polymere.
  • Fast drying times.
  • High-grade quality.
  • Substrate:        Matt Black coating
  • Flash point:     Under 23°C
  • Color:              Matt Black

RECOMMENDED USE:

Surface preparation

  • Clean surface with water and soap. Rinse and dry.
  • For best results, ensure the surface is thoroughly cleaned, degreased, dried and dust free. Wipe dry with a clean cloth.
  • Do not paint on porous or rough surfaces. From smooth surfaces you can easily peel off the film afterwards
  • After 10 – 20 minutes, all of finish coating is dried completely, applicartion for HGP Aerosol paints_NC Matt Black.

Spraying Technique

  • Shake the aerosol can for at least 2 minutes before use;
  • Press the button on the spray head. Try on a hard cover before painting;
  • Spray distance: 10 – 15cm;
  • Spray 1 single coat (thinner), flash off 5 to 10 minutes (touching does not stick). Then spray 1 couple coats;
  • Drying times: 15 - 30 minutes.

FIRST AID MEASURES:

  • Inhalation: Remove the victim to fresh air area. If rapid recovery does not  occur, perform artificial respiration and obtain medical attention.
  • Skin Contact: Remove contaminated clothing. Wash skin immediately with plenty of water and soap. If persistent irritation occurs, obtain medical attention.
  • Eye Contact: Immediately flush the eye with running water for at least 15 minutes. If persistent irritation occurs, obtain medical attention.
  • Ingestion: If the patient conscious, give plenty of water to drink. Do not  induce vomiting. If rapid recovery does not occur, obtain medical attention.

SHELF LIFE:

  • 2 years subject to proper storage conditions.
  • Recommended Storage Temperature: not under -5°C and over 25°C.
  • Aerosol cans should be stored for two hours at room temperature before use. For long term storage, keep in a dry well ventilated area and away from direct sunlight and frost. To maximize the lifespan of your aerosol, always invert the can and spray upside down for a few seconds after each use to clear the nozzle. If the nozzle becomes blocked, remove it from the can and soak it in gentle thinners.

PACKING: 400ML Aerosol can

The above information is provied with high reliability without warranty. For more information, please contact Customer Service:

 

OfficeL4-27.OT06, Landmark 4 Tower, Vinhomes Central Park 

720A Đien Bien Phu St, 22 Ward, Binh Thanh Dist, HCMC, Vietnam.

Tel: 028 710 95 779

Email: info@nanoprotech.vn

Showroom: 779 Kha Van Can St, Linh Tay Ward, Thuduc Dist, HCMC, Vietnam.

Working time:  8h - 17h | Mon  - Sat

 

 

Send your comment

Captcha

Relate Products

Scroll