Commercial Vehicle Colour

With the usual size ”Oversized: in height, length and width. Commercial vehicles are less repainted, refurbished and patched paint in the workshop or garage. They are usually located on the parking lot. HGP Aerosol paints_Truck Colour can solve those needs. 2K computerized paint system HGP can mix truck colours with Basecoat or Topcoat paints. Gun Nozzle is designed with a smooth spray and large spread as spray gun. The driver can paint himself without need of equipment: steam pump, professional spray gun.
175,000 đ



  • This is a 2K paint Refinish (Solid color does not include Metallic, Pearl, Crystal colors): fast drying, intense with excellent coverage.
  • The 2K color mixing system can accurately all of the Commercial vehicle’s colors from the original rich color ranges.
  • HGP Aerosol paints_Truck Colour can be used for all types of truck paints and there are enough color formulas from the world’s Commercial Vehicles manufacturers.
  • HGP Aerosol paints_Truck Colour will achieve the coverage with less paints than other paints of the same level. So, saving time and material costs are considerable.
  • HGP Aerosol paints_Truck Colour must be coated on the top with 1K or 2K Clear for protection.

Main component is Acrylic modified Resin and 2K computerized paint system for the leading Commercial vehicles manufacturers in the world.


  • Surface with standard coatings in good condition. The primers are coated and flattened well. Should use HGP’s primer paints.


  • Shake the aerosol can for at least 2 minutes before use;
  • Press the button on the spray head. Try on a hard cover before painting;
  • Spray distance: 10 – 15cm;
  • Spray 1 single coat (not too wet). Then spray 1 couple coats; 
  • Drying times between coats: 3 to 5 minutes (touching does not stick);                                      
  • After 10 – 20 minutes, all of finish coating is dried completely, applicartion for 1K or 2K Clear.


Surface preparation

  1. Clean surface with water and soap. Rinse and dry.
  2. For best results, ensure the surface is thoroughly cleaned, degreased, dried and dust free. Wipe dry with a clean cloth.
  3. Repair according to damage. Adding mattic on the scratched and roughed parts,..
  4. HGP Aerosol paints _1K or 2K primer paints.
  5. Sand primed surfaces wet or dry with P600-P800 sandpaper, degrease and dry before applying HGP Aerosol paints_Truck Colour.


Common Repair

  • Pay attention to the method of application.The spray must be in according to the procedure and apply coating within 20 minutes. Avoid over spraying.

Between the old and new paint layers: Apply the method of 2K Fade out Thiner.

① Coating the first of HGP Clear on over surface, spray  more over on the areas of repainting spots;
② Coating the second of HGP Clear, spray  more over on the area of repainting spots;
③ NO RECOMMENDED: Applied HGP Aerosol-2K Fade out Thiner on the sanded areas by P100 to lower the lid between the old and new paint layers that will be not finded them in polishing. ONLY USE INCASE REPAINTING.


  • Inhalation: Remove the victim to fresh air area. If rapid recovery does not  occur, perform artificial respiration and obtain medical attention.
  • Skin Contact: Remove contaminated clothing. Wash skin immediately with plenty of water and soap. If persistent irritation occurs, obtain medical attention.
  • Eye Contact: Immediately flush the eye with running water for at least 15 minutes. If persistent irritation occurs, obtain medical attention.
  • Ingestion: If the patient conscious, give plenty of water to drink. Do not  induce vomiting. If rapid recovery does not occur, obtain medical attention.


  • 2 years subject to proper storage conditions.
  • Recommended Storage Temperature: not under -5°C and over 25°C.
  • Aerosol cans should be stored for two hours at room temperature before use. For long term storage, keep in a dry well ventilated area and away from direct sunlight and frost. To maximize the lifespan of your aerosol, always invert the can and spray upside down for a few seconds after each use to clear the nozzle. If the nozzle becomes blocked, remove it from the can and soak it in gentle thinners.

PACKING: 400ML Aerosol can

The above information is provied with high reliability without warranty. For more information, please contact Customer Service:


OfficeL4-27.OT06, Landmark 4 Tower, Vinhomes Central Park 

720A Đien Bien Phu St, 22 Ward, Binh Thanh Dist, HCMC, Vietnam.

Tel: 028 710 95 779


Showroom: 779 Kha Van Can St, Linh Tay Ward, Thuduc Dist, HCMC, Vietnam.

Working time:  8h - 17h | Mon  - Sat


  • HGP Aerosol paints_Truck Colour has 2 kinds: Basecoat and Topcoat 2K (Two-Pack). When you choses Topcoat 2K Truck Colours, you has to use within 24 hours from delivery time.
  • This is not a special product but a manufactured professional one That is checked for integrity with the original car color code, then packed in the aerosol can. Our expert colour team can mix and match the exact factory color code and HGP Aerosol paints_Truck Colour is perfectly suited to your job. Please note that all solid colours (non-Metallic or Pearl) can use Topcoat 2K Clear without  Bacoatse 2K Clear. However, If you chose Metallic or Pearl colour, you ought to use Basecoat 2K Clear.
  • If you spray on metal parts directly, then HGP Aerosol_Etch Primer 13483 will be required followed by a single of coats of HGP Aerosol_Primer Grey NC0025.
  • In order to match your colour requirements exactly, please provide more color code, car manufacturer, model car, manufactured year. Otherwise, you should give us gas cap or actual color of  your vehicle to get accurate color from our  technician. Our technical team are mixing match colour with the lastest spectral technology. HGP Aerosol paints_Truck Colour is suitable for all areas of industry, housing, hobby and of course for vehicles.
For more information how to find a paint color code. Please call 028 71095779 or Email:


Send your comment


Relate Products