Glowing Colour

Glows bright green in the dark after exposure to light.
145,000 đ
Code: 2-BX-GLO
Quantity

HGP AEROSOL PAINTS_GLOWING COLOUR 

 DESCRIPTION

  • HGP Aerosol paints_Glowing Colour can be sprayed onto walls, ceilings and other objects to make them glow bright green in the dark after exposure to light. (Colour appears off white in normal light.)
  • HGP Aerosol paints_Glowing Colour creates a glowing effect for up to 4-8 hours when charged by natural or artificial light. It can be applied to wood, metal, drywall and plastic. IMPORTANT! Use over a white or light colored surface.

Main component is Acrylic modified Resin and 2K computerized paint system for Decorations.

SUBSTRATE

  • Surface with standard coatings in good condition. The primers are coated and flattened well. Should use HGP’s primer paints.

SPRAYING TECHNIQUE:

  • Shake the aerosol can for at least 2 minutes before use;
  • Press the button on the spray head. Try on a hard cover before painting;
  • Spray distance: 10 – 15cm;
  • Spray 1 single coat (not too wet). Then spray 1 couple coats; 
  • Drying times between coats: 3 to 5 minutes (touching does not stick);                                      
  • After 10 – 20 minutes, all of finish coating is dried completely, applicartion for 1K or 2K Clear.

RECOMMENDED USE:

Surface preparation

  1. Clean surface with water and soap. Rinse and dry.
  2. For best results, ensure the surface is thoroughly cleaned, degreased, dried and dust free. Wipe dry with a clean cloth.
  3. Repair according to damage. Adding mattic on the scratched and roughed parts,..
  4. HGP Aerosol paints–1K or 2K primer paints.
  5. Sand primed surfaces wet or dry with P600-P800 sandpaper, degrease and dry before applying HGP Aerosol paints_Glowing Colour.

FIRST AID MEASURES:

  • Inhalation: Remove the victim to fresh air area. If rapid recovery does not  occur, perform artificial respiration and obtain medical attention.
  • Skin Contact: Remove contaminated clothing. Wash skin immediately with plenty of water and soap. If persistent irritation occurs, obtain medical attention.
  • Eye Contact: Immediately flush the eye with running water for at least 15 minutes. If persistent irritation occurs, obtain medical attention.
  • Ingestion: If the patient conscious, give plenty of water to drink. Do not  induce vomiting. If rapid recovery does not occur, obtain medical attention.

SHELF LIFE:

  • 2 years subject to proper storage conditions.
  • Recommended Storage Temperature: not under -5°C and over 25°C.
  • Aerosol cans should be stored for two hours at room temperature before use. For long term storage, keep in a dry well ventilated area and away from direct sunlight and frost. To maximize the lifespan of your aerosol, always invert the can and spray upside down for a few seconds after each use to clear the nozzle. If the nozzle becomes blocked, remove it from the can and soak it in gentle thinners.

PACKING: 400ML Aerosol can

The above information is provied with high reliability without warranty. For more information, please contact Customer Service:

 

OfficeL4-27.OT06, Landmark 4 Tower, Vinhomes Central Park 

720A Đien Bien Phu St, 22 Ward, Binh Thanh Dist, HCMC, Vietnam.

Tel: 028 710 95 779

Email: info@nanoprotech.vn

Showroom: 779 Kha Van Can St, Linh Tay Ward, Thuduc Dist, HCMC, Vietnam.

Working time:  8h - 17h | Mon  - Sat

 

HGP AEROSOL PAINTS_GLOWING COLOUR

OVERVIEW:

  • HGP Aerosol paints _Glowing Colour can be sprayed onto walls, ceilings and other objects to make them glow bright green in the dark after exposure to light. (Colour appears off white in normal light.).
  • HGP Aerosol paints _Glowing Colour creates a glowing effect for up to 4-8 hours when charged by natural or artificial light. It can be applied to wood, metal, drywall and plastic.

APPLICATION:

  • Apply to wood, metal, plastic and more
  • Suitable for indoor and outdoor use
  • Great for kids rooms, school projects and decorations.

FEATURES:

  • Tip – Apply over a white or light covered surface. Object will need to charge for several hours before the glowing effect will occur.

For more information how to find a paint color code. Please call 028 71095779 or Email: info@nanoprotech.vn

Send your comment

Captcha
Scroll